[chimerax-users] [ChimeraX] #3464: partial surface mesh
Elaine Meng
meng at cgl.ucsf.edu
Mon Jul 6 12:00:58 PDT 2020
Hi Rory,
There is no "hydrophobic surface" ... maybe you mean the molecular surface shown as solid (not dot or mesh)? Chimera's presets include "hydrophobicity surface" which is perhaps misleading, simply means the molecular surface colored by hydrophobicity.
What exactly are you trying to do? Show protein as mesh surface and ligand as solid surface? You can definitely do it (or any combination of mesh surface on some atoms, solid on some other atoms) by opening multiple copies of the structure, as we said in previous messages. Then in the solid-surface copy, only show the parts of the surface you want as solid. In the mesh-surface copy, show the parts you want as mesh. For example, here is an example that shows H-ras as mesh surface with its ligand GCP as solid surface (image attached below), commands:
open 121p
open 121p
surf #1 & protein
surf #2:gcp
surf style #1 mesh
transp #1 50 surfaces
color #2 gold surfaces
hide solvent
This can all be done with the menu as well, but it would take a lot more typing to enter that whole procedure.
I Cc'd chimerax-users at cgl.ucsf.edu which is the recommended address for asking ChimeraX questions (for future reference).
I hope this helps,
Elaine
-----
Elaine C. Meng, Ph.D.
UCSF Chimera(X) team
Department of Pharmaceutical Chemistry
University of California, San Francisco
> On Jul 6, 2020, at 10:30 AM, Gordon, Rory <rory.gordon.19 at ucl.ac.uk> wrote:
>
> Hi Guys,
>
> Further to previous email, just tried fiddling with the transparency settings.
>
> I can get the protein structure to change through the transparency gradient for hydrophobic surface.
>
> However, for the substrate/ligands there seems to be binary system where you can either have full transparency or none at all.
>
> The hydrophobic surface can be coloured both for the protein and substrate/ligand.
>
> Cheers,
>
> Rory
> From: Gordon, Rory <rory.gordon.19 at ucl.ac.uk>
> Sent: 06 July 2020 18:26
> To: Tom Goddard <goddard at sonic.net>; Elaine Meng <meng at cgl.ucsf.edu>
> Cc: Eric Pettersen <pett at cgl.ucsf.edu>
> Subject: Re: [ChimeraX] #3464: partial surface mesh
>
> Hi Tom, Elaine and Eric
>
> I tried to establish the mesh surface with the whole protein structure selected through the GUI. I can only get the hydrophobic surface which I can colour with B-factor.
>
> The options of Mesh, Dot or Solid don't seem to change anything.
>
> Not sure how to get round this, so any help would be appreciated.
>
> Cheers,
>
> Rory
>
>
> From: Tom Goddard <goddard at sonic.net>
> Sent: 02 July 2020 18:24
> To: Elaine Meng <meng at cgl.ucsf.edu>
> Cc: Gordon, Rory <rory.gordon.19 at ucl.ac.uk>; Eric Pettersen <pett at cgl.ucsf.edu>
> Subject: Re: [ChimeraX] #3464: partial surface mesh
>
> Another trick that makes these meshes look nicer is to make them about 50-80% transparent (command "transp #2 70"). It gives the mesh an airy look.
>
> Tom
>
>
>> On Jul 2, 2020, at 10:17 AM, Elaine Meng <meng at cgl.ucsf.edu> wrote:
>>
>> Hi Rory,
>> Here is an example image where I opened the same structure twice. I showed one copy with mesh surface and the second one with solid surface, and then simply hid parts of the solid surface. This is the way that Tom mentioned.
>> Elaine
>>
>> <example.png>
>>
>>
>>> On Jul 2, 2020, at 3:29 AM, ChimeraX <ChimeraX-bugs-admin at cgl.ucsf.edu> wrote:
>>>
>>> #3464: partial surface mesh
>>> ---------------------------------------+----------------------------
>>> Reporter: rory.gordon.19@… | Owner: Eric Pettersen
>>> Type: defect | Status: closed
>>> Priority: normal | Milestone:
>>> Component: Surface | Version:
>>> Resolution: fixed | Keywords:
>>> Blocked By: | Blocking:
>>> Notify when closed: | Platform: all
>>> Project: ChimeraX |
>>> ---------------------------------------+----------------------------
>>>
>>> Comment (by rory.gordon.19@…):
>>>
>>> {{{
>>> Hi Eric,
>>>
>>> Thanks for your email.
>>>
>>> I had actually seen a graphic in a publication which gave me that idea.
>>>
>>> Thanks anyway for the pointers.
>>>
>>> Cheers,
>>>
>>> Rory
>>> ________________________________
>>> From: ChimeraX <ChimeraX-bugs-admin at cgl.ucsf.edu>
>>> Sent: 01 July 2020 18:23
>>> Cc: goddard at cgl.ucsf.edu <goddard at cgl.ucsf.edu>; meng at cgl.ucsf.edu
>>> <meng at cgl.ucsf.edu>; pett at cgl.ucsf.edu <pett at cgl.ucsf.edu>; Gordon, Rory
>>> <rory.gordon.19 at ucl.ac.uk>
>>> Subject: Re: [ChimeraX] #3464: partial surface mesh (was: ChimeraX bug
>>> report submission)
>>>
>>> #3464: partial surface mesh
>>> ---------------------------------------+----------------------------
>>> Reporter: rory.gordon.19@… | Owner: Eric Pettersen
>>> Type: defect | Status: accepted
>>> Priority: normal | Milestone:
>>> Component: Unassigned | Version:
>>> Resolution: | Keywords:
>>> Blocked By: | Blocking:
>>> Notify when closed: | Platform: all
>>> Project: ChimeraX |
>>> ---------------------------------------+----------------------------
>>> Changes (by Eric Pettersen):
>>>
>>> * status: new => accepted
>>> * cc: Tom Goddard, Elaine Meng (added)
>>> * project: => ChimeraX
>>> * platform: => all
>>> * owner: (none) => Eric Pettersen
>>>
>>>
>>> Comment:
>>>
>>> Hi Rory,
>>> I don't believe you can change just part of a surface into mesh,
>>> it's all or nothing. You can make that part of the surface partially
>>> transparent instead with Actions→Surface→Transparency.
>>>
>>> --Eric
>>>
>>> Eric Pettersen
>>> UCSF Computer Graphics Lab
>>>
>>> -----
>>> Tom, should the command "surface style (#!4 & sel) mesh" actually do
>>> nothing (with part of the surface selected)? That seems surprising.
>>> Seems like it should change the whole surface into mesh. Is that a bug
>>> or
>>> am I misunderstanding something?
>>>
>>> --Eric
>>>
>>> --
>>> Ticket URL:
>>> <https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fplato.cgl.ucsf.edu%2Ftrac%2FChimeraX%2Fticket%2F3464%23comment%3A1&data=02%7C01%7C%7Cb50922f7c1a5440c438908d81de37918%7C1faf88fea9984c5b93c9210a11d9a5c2%7C0%7C0%7C637292210119419879&sdata=GSVMvSlVzE7eo%2FbcWesHMjUigJgWIvMFzU1efXANpRI%3D&reserved=0>
>>> ChimeraX
>>> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.rbvi.ucsf.edu%2Fchimerax%2F&data=02%7C01%7C%7Cb50922f7c1a5440c438908d81de37918%7C1faf88fea9984c5b93c9210a11d9a5c2%7C0%7C0%7C637292210119429876&sdata=WAAsovWYcC03Q8hQTVRlAK2lbNXj2ULqvEo00cNukV0%3D&reserved=0>
>>> ChimeraX Issue Tracker
>>> }}}
>>>
>>> --
>>> Ticket URL: <https://plato.cgl.ucsf.edu/trac/ChimeraX/ticket/3464#comment:7>
>>> ChimeraX <http://www.rbvi.ucsf.edu/chimerax/>
>>> ChimeraX Issue Tracker
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://plato.cgl.ucsf.edu/pipermail/chimerax-users/attachments/20200706/909cd017/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: example.png
Type: image/png
Size: 1353449 bytes
Desc: not available
URL: <http://plato.cgl.ucsf.edu/pipermail/chimerax-users/attachments/20200706/909cd017/attachment-0001.png>
More information about the ChimeraX-users
mailing list