[chimerax-users] Align command; designating the positions to align

[McClean, Phillip]

Thanks Harper, that code worked.

With regards to the align command, I just check and every pair of amino acids is identical and the number of atoms is identical.  I still can't figure how to get the rmsd value for all of the atoms found with each pair.

Phil
________________________________
From: Elaine Meng <meng at cgl.ucsf.edu>
Sent: Monday, July 18, 2022 4:42 PM
To: Smith, Harper E. <smith.12510 at buckeyemail.osu.edu>; McClean, Phillip <phillip.mcclean at ndsu.edu>
Cc: ChimeraX Users Help <chimerax-users at cgl.ucsf.edu>
Subject: Re: [chimerax-users] Align command; designating the positions to align

God point.  Also, if you use matchmaker, it will do a sequence alignment and figure out which numbers go with which (so you don't have to give residue ranges at all, unless you want to restrict it).  Matchmaker will only use the alpha-carbons, though.  Align will give you more precise control over exactly which residues are used and allow you to use all backbone atoms if you want.

There is both a Matchmaker GUI (tool) and a command.
<https://rbvi.ucsf.edu/chimerax/docs/user/tools/matchmaker.html>
<https://rbvi.ucsf.edu/chimerax/docs/user/commands/matchmaker.html>

Elaine


> On Jul 18, 2022, at 2:38 PM, Smith, Harper E. <smith.12510 at buckeyemail.osu.edu> wrote:
>
> Hi Phil,
>
> Another solution would be to use MatchMaker instead. Instead of the command you tried, use:
> mmaker #1:11-323 to #2:24-336
> In my experience, MatchMaker is quite powerful.
>
> Best,
> Harper
> From: ChimeraX-users <chimerax-users-bounces at cgl.ucsf.edu> on behalf of Elaine Meng via ChimeraX-users <chimerax-users at cgl.ucsf.edu>
> Sent: Monday, July 18, 2022 5:33 PM
> To: McClean, Phillip <phillip.mcclean at ndsu.edu>
> Cc: chimerax-users at cgl.ucsf.edu <chimerax-users at cgl.ucsf.edu>
> Subject: Re: [chimerax-users] Align command; designating the positions to align
>
>
>
> Hi Phil,
> Your syntax is fine if you really meant to specify all atoms of the residues.  Most likely reasons for the error are:
>
> (1) the residue types are not identical, so they contain different numbers of atoms (e.g. tryptophan has many more atoms than alanine)
> (2) one structure or the other is missing some residues from the coordinates (e.g. a flexible loop was not resolved from density)
> (3) one structure or the other has multiple chains so you are getting residues with those numbers from more than one chain (e.g. chain A has residues 11-323 but so does chain B)
>
> Another possible problem is that there is no underscore in the "toAtoms" option keyword.  You can truncate it to "to" if you like.
>
> <https://urldefense.com/v3/__https://rbvi.ucsf.edu/chimerax/docs/user/commands/align.html__;!!KGKeukY!xCbiexKkpg7JPT323Wwlpw5TX3YDnnS921fjgr03zjvBl0Gp3g9AO0jDyorUMvvDg8gxubpM4mHneWhdi7byEnMoUqUZD_ik7EI$ >
>
> Assuming it is the first one, the solution is to specify matching only backbone atoms, or only alpha-carbons.  Whichever you would like the RMSD to reflect. You would use an @ symbol to specify atom names.  So it may be something like
>
> align #1:11-323 at n,ca,c,o to #2:24-336 at n,ca,c,o
>
> ...for all backbone atoms, or for alpha-carbons only:
>
> align #1:11-323 at ca to #2:24-336 at ca
>
> <https://urldefense.com/v3/__https://rbvi.ucsf.edu/chimerax/docs/user/commands/atomspec.html__;!!KGKeukY!xCbiexKkpg7JPT323Wwlpw5TX3YDnnS921fjgr03zjvBl0Gp3g9AO0jDyorUMvvDg8gxubpM4mHneWhdi7byEnMoUqUZzPSqGIk$ >
>
> I hope this helps,
> Elaine
> -----
> Elaine C. Meng, Ph.D.
> UCSF Chimera(X) team
> Department of Pharmaceutical Chemistry
> University of California, San Francisco
>
> > On Jul 18, 2022, at 2:22 PM, McClean, Phillip via ChimeraX-users <chimerax-users at cgl.ucsf.edu> wrote:
> >
> > Hi,
> >
> > I have been trying to properly code the align command.  I would like to use the command to determine the RMSD value between corresponding sections of two highly homologous proteins.  Here are the details:
> >
> > Model 1 is to be aligned to Model 2; each model only has one chain
> > Model 1 positions (residues=amino acids) 11-323
> > Model 2 positions ( residues=amino acids) 24-336
> >
> > When I pair each of the amino acids that are being aligned, everyone of the pairs has the same number of atoms.
> >
> > Here is what I thought would work:
> >
> > align #1:11-323 to_atoms #2:24-336
> >
> > Here is the error message:
> >
> > Unequal number of atoms to pair, 2483 to 2371
> >
> > I am still trying to understand the nomenclature for understanding residues and atoms.
> >
> > Thanks for any help you can provide.
> >
> > Phil McClean
>
>
> _______________________________________________
> ChimeraX-users mailing list
> ChimeraX-users at cgl.ucsf.edu
> Manage subscription:
> https://urldefense.com/v3/__https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users__;!!KGKeukY!xCbiexKkpg7JPT323Wwlpw5TX3YDnnS921fjgr03zjvBl0Gp3g9AO0jDyorUMvvDg8gxubpM4mHneWhdi7byEnMoUqUZ8dXTe8c$

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.rbvi.ucsf.edu/pipermail/chimerax-users/attachments/20220718/f3265180/attachment-0001.html>